Vol 9 No 7 (2025): Journal of Electronic Research and Application | Journal of Electronic Research and Application

Flexible Manufacturing Assists Intelligent Manufacturing Upgrade of Automobile Industry

Weiming Huang 1-4

DOI: 10.26689/jera.v9i7.13647

Exploration into the Introduction of Visual Inspection Equipment and Electrical Management in Refrigeration Product Manufacturing

Junli Huo 5-11

DOI: 10.26689/jera.v9i7.13608

Comprehensive Power Dispatching in Smart Micro- Grid: Collaborative Optimization of Technology and Management

Jiayi Wang 12-18

DOI: 10.26689/jera.v9i7.13635

Domestic Application and Risk Management of Bimetallic Self-Sealing Composite Gasket in High Temperature Petrochemical Equipment

Chulian Guan 19-25

DOI: 10.26689/jera.v9i7.13609

Key Technologies and Implementation Paths for Automation Transformation of Old Production Lines

Jinmin Ji 26-32

DOI: 10.26689/jera.v9i7.13610

Research on Intelligent Management Mode of Property Electromechanical: A New Way to Improve the Efficiency of Property Management

Jinwei Jiang 33-39

DOI: 10.26689/jera.v9i7.13611

Generation and Application Evaluation of Intelligent Numerical Control Programming Strategy for Domestic CAM System Integrated with AI Technology

Jianglong Li 40-46

DOI: 10.26689/jera.v9i7.13612

Hardware Development and Application of Silicon Carbide and Gallium Nitride in Integrated Circuit Detection Systems

Boran Li 47-53

DOI: 10.26689/jera.v9i7.13636

Research on Topology Optimization and Dynamic Reconfiguration Strategies for Matrix Flexible Power Distribution Units

Weijian Li 54-60

DOI: 10.26689/jera.v9i7.13613

Risk Management Strategy of Automobile Manufacturing Engineering and Its Application in Welding Production

Qu Liang 61-67

DOI: 10.26689/jera.v9i7.13637

Construction and Implementation of Life Cycle Technology Management System for Electromechanical Equipment in Property Service Enterprises

Xianyan Lin 68-75

DOI: 10.26689/jera.v9i7.13614

Risk Management of Food Processing Electromechanical Engineering: From the Perspective of Production Line Projects

Keng Liu 76-84

DOI: 10.26689/jera.v9i7.13615

Optimization Strategy of Heat Pump Product Structure from the Perspective of Mechanical Design

Zhipeng Liu 85-91

DOI: 10.26689/jera.v9i7.13649

Technical Management Strategy of Electrical Commissioning and Weak Current System Design for Environmental Protection Projects

Linhui Ou 92-98

DOI: 10.26689/jera.v9i7.13638

Scheme Layout and Optimization Strategies for the Mechanical Structure Design of Semiconductor Probe Stations

Wenfeng Peng 99-105

DOI: 10.26689/jera.v9i7.13616

The Influence of Surface Treatment of Mold Materials on the Service Life of Low-Voltage Electrical Component Molds and Green Manufacturing Strategies

Jixin Tian 106-112

DOI: 10.26689/jera.v9i7.13617

Research on Cadre Appointment Decision-Making Based on Data Analysis

Xuming Zhou 113-119

DOI: 10.26689/jera.v9i7.13618

Optimization and Technological Innovation Path of Photovoltaic System Field Management from the Perspective of Electrical Engineering

Shaokang Wu 120-126

DOI: 10.26689/jera.v9i7.13619

Research on the Operation Status Evaluation and Energy-Saving Control Measures of Electrical Engineering Facilities and Equipment in Office Buildings

Huichang Wu 127-135

DOI: 10.26689/jera.v9i7.13620

High-Frequency Analog Signal Processing in Integrated Circuits

Zhuoqing Wu 136-141

DOI: 10.26689/jera.v9i7.13621

Factory Procurement Management from the Perspective of Big Data in the Manufacturing Industry

Feifei Wu 142-150

DOI: 10.26689/jera.v9i7.13622

Research on Integrated Power Dispatching and Control Strategy in Smart Microgrid Environment

Jiayi Wang 151-157

DOI: 10.26689/jera.v9i7.13623

Research on Optimization Strategies of Sheet Metal Materials in Mechanical Processing Structure Design

Yiheng Xu 158-164

DOI: 10.26689/jera.v9i7.13624

The Construction and Implementation of the Comprehensive Management and Control System for Facilities and Equipment in Property Services

Shitao Yao 165-173

DOI: 10.26689/jera.v9i7.13625

Exploration of Control Technology for Stator and Rotor Equipment of Flat Wire Motor Based on Automation

Yongcheng Ye 174-180

DOI: 10.26689/jera.v9i7.13653

Technical Management and Risk Prevention and Control of High and Low Voltage Complete Sets of Equipment in Power Engineering

Fuquan Zhang 181-189

DOI: 10.26689/jera.v9i7.13626

Research on the Performance Appraisal System of Cadres in Government Organs

Xuming Zhou 190-197

DOI: 10.26689/jera.v9i7.13627

Research on Electrical Direction Management of Refrigeration Product Manufacturing Equipment and Electrical Management of Visual Inspection Equipment

Junli Huo 198-204

DOI: 10.26689/jera.v9i7.13628

Exploration of AI Fully Automatic Warehouse Adjustment Technology for Distribution Network Automation

Yaocan Zhou 205-211

DOI: 10.26689/jera.v9i7.13629

Manufacturing of Touch Glass for Mobile Phones and Tablets: A Transformation from Traditional to Intelligent Manufacturing

Qingshan Gao 212-218

DOI: 10.26689/jera.v9i7.13630

Exploration of the Application of Micro-Power Design and Transmission within the Scope of Mechanical Design in Electronic Products

Yong Wan 219-227

DOI: 10.26689/jera.v9i7.13631

Synergistic Development Strategies for Mechanical Design and Manufacturing with Equipment Technical Transformation and Innovation

Jianxin Deng 228-234

DOI: 10.26689/jera.v9i7.13639

Construction Technology of Electrical Projects in Data Centers

Xiaoyong Zhong 235-240

DOI: 10.26689/jera.v9i7.13632

Research on ESD and TVS Protection Technology in Semiconductor IC Package Test

Zhiqiang Zhang 241-246

DOI: 10.26689/jera.v9i7.13633

Analysis of the Application of Low-Frequency Inter- Harmonic Monitoring in DC Converter Stations Based on Power Quality Monitoring Devices

Rui Xia 247-258

DOI: 10.26689/jera.v9i7.13634