Keywords
Topology optimization
Dynamic reconfiguration
Submitted : 2025-12-30
Accepted : 2026-01-14
Published : 2026-01-29
Abstract
This paper focuses on the topology optimization and dynamic reconfiguration strategies of matrix-type flexible distribution units, elaborating on the structural characteristics of flexible distribution networks and analyzing their response mechanisms to dynamic loads. It proposes topology optimization design criteria and a thermo-mechanical coupling optimization method for charging pile products. A network loss minimization and reliability assurance model is constructed, and an intelligent reconfiguration algorithm is designed and validated through digital twin simulations. Engineering applications demonstrate that this strategy enhances the energy efficiency and response speed of charging pile distribution systems, proving its significant value.
References
Geng X, 2022, Research on Topology Construction and Dynamic Reconstruction of Distribution Network, thesis, North China Electric Power University (Beijing).
Feng Y, 2022, Research on Optimization Design Method of Topology and Module Space Layout of Thermoelectric Module Unit, thesis, Dalian University of Technology.
Fan Y, 2022, Research on Dynamic Restructuring Method of Distribution Network with Distributed Photovoltaic and Electric Vehicles, thesis, Xi’an University of Technology.
Huang J, 2023, Research on Topology Optimization Method of Flexible Mechanisms under Large Deformation Contact Conditions, thesis, Shandong University.
Li Q, 2021, Research on Topology Optimization of Continuum Structures Based on Unit Differential Method, thesis, Guangdong University of Technology.
Liang D, Guo Y, Wang X, et al., 2022, Two Stage Robust Optimization of Flexible Interconnected Distribution Systems Considering Energy Storage and Dynamic Reconfiguration. Electric Power Construction, 43(9): 94–103.
Gan W, Wu C, Song Y, et al., 2021, Topology Optimization Design of Flexible Mechanisms for Anti Buckling. Henan Science and Technology, 2021(18): 42–44.
Li H, Wang A, Zhang Y, et al., 2021, Dynamic Reconstruction of Distribution Network Considering Changes in Load and Distributed Power Sources. Guangxi Electric Power, 44(2): 33–41.
Gao S, Qin W, Han X, et al., 2014, Two-Level Real-Time Reconstruction of Distribution Network Considering Load Time-Varying and Distributed Power Generation Output Fluctuation. Grid Technology, 38(11): 3260–3265.
Dan R, Yin Z, Xiao X, et al., 2010, Control Strategy of Medium Voltage High Power Load Characteristics Simulation Device. Chinese Journal of Electrical Engineering, 30(9): 8–12.