Keywords
Visual inspection
Electrical management
Submitted : 2025-12-30
Accepted : 2026-01-14
Published : 2026-01-29
Abstract
This article focuses on the manufacturing of refrigeration products and elaborates on the introduction and application of visual inspection equipment and electrical management systems. It introduces the principles of visual inspection technology, analyzes existing difficulties and corresponding solutions, and proposes measures for optimizing the architecture of electrical management systems. The practical effectiveness is verified through multidimensional indicators, operational data comparison, and testing. The current research still has limitations in adapting to low-temperature environments, and the integration of the industrial Internet of Things (IoT) and digital twin technology may become an important direction for future development.
References
Hu W, 2022, Research on Visual Inspection Methods for Multi-scale Surface Defects of Complex Pattern Industrial Products, thesis, Guangdong University of Technology.
Liang H, 2022, Research on Vision-based Detection and Obstacle Avoidance Technology in UAV Formation, thesis, Nanjing University of Aeronautics and Astronautics.
Dong Z, 2022, Design and Research of a Visual Inspection System for Tobacco Shred Conveying Status, thesis, Shandong Agricultural University.
Ge C, 2022, Research on Vision Detection Technology in High-Precision Automatic Drilling and Riveting Machines, thesis, Nanjing University of Aeronautics and Astronautics.
Zhou P, 2021, Research on Non-destructive Visual Inspection and Evaluation Methods for Steel Wire Ropes, thesis, China University of Mining and Technology (Jiangsu).
Zhou J, Guo L, Xiong C, et al., 2021, Design of a Fully Automatic Glass Corner Cutting and Slotting Equipment Based on Visual Inspection. Combination Machine Tool and Automatic Machining Technology, 2021(8): 162–164.
Pang X, 2024, Design of a PLC-based Visual Inspection System for Agricultural Products. China New Technology and New Products, 2024(10): 39–41.
Gu H, Zhou L, Song S, et al., 2022, Application of Visual Technology in the Manufacturing Process of White Body. Metal Processing (Hot Working), 2022(7): 18–21.
Lei Y, Zhao Y, Wang Q, et al., 2021, Intelligent Vehicle Navigation System Based on Visual Detection and Positioning. Electronic Testing, 2021(4): 41–43.
Ji W, Wang Y, 2021, A Brief Discussion on the Development and Application of Visual Measurement in Metrological Testing. Standardization and Quality of the Machinery Industry, 2021(4): 37–39.