As an important transportation hub in China the traffic volume and driving speed are important aspects of expressways. Therefore the protection requirements for roadbed side slopes are higher and it is necessary to resist rainwater erosion and other damages by protecting the side slopes. Therefore it is necessary to adopt effective technical means of subgrade protection and support. This paper mainly summarizes the characteristics of highway subgrade slope protection construction and slope protection and support technologies.
Xu G, Chen L, Tang W, 2022, Disposal Measures for Landslide Deformation of Soft Red Clay Strata——Taking the Subgrade of the Left Section of ZK124+128–K124+455 of Yuxiang Expressway as an Example. Engineering Technology Research, 7(12): 32–34.
Cai L, Peng Q, 2022, Stability Analysis of a Highway Slope Based on GEO-Slope. Science and Technology Innovation, 2022(5): 140–144.
Song X, Wang X, 2022, Subgrade Design of Mingcun-Dongjiakou Expressway. Shandong Communications Technology, 2022(1): 58–60.
Huang F, 2021, Discussion on Protection and Support Technology of Expressway Subgrade Slope. Building Materials Development Orientation (Part 2), 19(2): 64–65.
Guo Q, 2021, Construction Technology of Roadbed High Slope Protection Engineering. Real Estate Guide, 2021(17): 126.
Li Z, 2020, Exploration of Expressway Subgrade Slope Protection and Support Methods. Regional Governance, 2020(36): 203–204.
Yang S, 2020, Talking about the Construction Technology of Anchor (Cable) Frame Beam on High Slope of Expressway Subgrade. Architecture and Decoration, 2020(18): 113.
Wang J, Liang Y, Ren T, et al., 2020, Stability Evaluation of Reinforced Loess High Fill Embankment Slope Under Heavy Rain Conditions. Water Conservancy Planning and Design, 2020(12): 108–113.
Luo G, 2020, Stress Mechanism and Construction Technology of Large Diameter Circular Anti-Slide Pile. Engineering Technology Research, 5(11): 64–65.
Wei H, 2022, Construction Technology of Highway Subgrade Slope Protection and Support. Engineering Construction and Design, 2022(15): 184–186.