Submission Preparation ChecklistAs part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.
- The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
- The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
- Where available, URLs for the references have been provided.
- The text is single-spaced; uses a 12-point font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
- The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
- If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Blind Review have been followed.
Before your submission, please check that your manuscript has been prepared in accordance to the step-by-step instructions for submitting a manuscript to our online submission system. We recommend that you keep this page open for your reference as you move through the submission process.
If there are any differences in author guidelines between the print and online version, it isÂ recommended that authors refer to the online version for use.
Your manuscript should be in MS Word or LaTeX format. All manuscripts must be written in clear, comprehensible English. Both American and British English are acceptable. Usage of non-English words should be kept to a minimum and all must be italicized (except for e.g. and i.e.) If you have concerns about the level of English in your submission, please ensure that it is proofread before submission by a native English speaker or a scientific editing service.Â
All submissions should include a cover letter as a separate file. A cover letter should contain a brief explanation of what was previously known, the conceptual advancement with the findings and its significance to broad readership. The cover letter is confidential and will be read only by the editors. It will not be seen by reviewers.
The title should capture the conceptual significance for a broad audience. The title should not be more than 50 words and should be able to give readers an overall view of the paperâ€™s significance. Titles should avoid using uncommon jargons, abbreviations and punctuation.
List of Authors
The names of authors must be spelled out rather than set in initials with their affiliations footnoted. Authors should be listed according to the extent of their contribution, with the major contributor listed first. All corresponding authors (maximum 2) should be identified with an asterisk. Affiliations should contain the following core information: department, institution, city, state, postal code, and country. For contact, email address of only one corresponding author is expected within the manuscript. Please note that all authors must see and approve the final version of the manuscript before submitting.
Articles must include an abstract containing a maximum of 200 words. The purpose of abstract is to provide sufficient information for a reader to determine whether or not to proceed to the full text of the article. After the abstract, please give 5-8 key words; please avoid using the same words as those already used in the title.
Please number all section headings, subheadings and sub-subheadings. Use boldface to identify major headings (e.g.Â 1,Â 2,Â 3,Â etc.) and subheadings (e.g.Â 1.1,Â 1.2,Â 2.1,Â 2.2Â etc.) For the sub-subheadings, please distinguish it further usingÂ non-boldface numbers inÂ parenthesis (e.g. (1), (2), (3),Â etc.)
Introduction should provide a background that gives a broad readership an overall outlook of the field and the research performed. It tackles a problem and states its important regarding with the significance of the study. Introduction can conclude with a brief statement of the aim of the work and a comment about whether that aim was achieved.
Materials and Methods
This section provides the general experimental design and methodologies used. The aim is to provide enough detail to for other investigators to fully replicate your results. It is also required to facilitate better understanding of the results obtained. Protocols and procedures for new methods must be included in detail to reproduce the experiments.
Ethics information, including IACUC permit numbers and/or IRB name, if applicable. This information should be included in a subheading labeled "Ethics Statement" in the "Methods" section of your manuscript file, in as much detail as possible.
This section can be divided into subheadings. This section focuses on the results of the experiments performed.
This section should provide the significance of the results and identify the impact of the research in a broader context. It should not be redundant or similar to the content of the results section.
Please use the conclusion section for interpretation only, and not to summarize information already presented in the text or abstract.
Conflict of Interest
All authors are required to declare all activities that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript. Examples of such activities could include personal or work-related relationships, events, etc. Authors who have nothing to declare are encouraged to add "No conflict of interest was reported by all authors" in this section.
Authors should declare all financial and non-financial support that have the potential to be deemed as a source of competing interest in relations to their submitted manuscript in this section. Financial supports are generally in the form of grants, royalties, consulting fees and more. Examples of non-financial support could include the following: externally-supplied equipments/biological sources, writing assistance, administrative support, contributions from non-authors etc.
This section is optional and is for all materials (e.g. advanced technical details) that has been excluded from the main text but remain essential to readers in understanding the manuscripts. This section is not for supplementary figures. Authors are advised to refer to the section on â€˜Supplementary figuresâ€™ for such submissions.
The text of the manuscript should be in Microsoft Word or Latex. The length of the manuscript cannot be more than 50000 characters (inclusive of spaces) or approximately 7000 words.
Nomenclature for genes and proteins
This journal aims to reach researchers all over the globe. Hence, for both reviewersâ€™ and readersâ€™ ease in comprehension, authors are highly encouraged to use the appropriate gene and protein nomenclature. Authors may prefer to utilize resources such asÂ http://www.ncbi.nlm.nih.gov/gene
Authors should include all figures into the manuscript and submit it as 1 file in the OJS system. Reference to the â€œInstructions for Typesetting manuscriptâ€ is strongly encouraged. Figures include photographs, scanned images, graphs, charts and schematic diagrams. Figures submitted should avoid unnecessary decorative effects (e.g. 3D graphs) as well as be minimally processed (e.g. changes in brightness and contrast applied uniformly for the entire figure). It should also be set against a white background. Please remember to label all figures (e.g. axis etc.) and add in captions (below the figure) as required. These captions should be numbered (e.g.Â Figure 1,Â Figure 2, etc.) in boldface. All figures must have a brief title (also known as caption) that describes the entire figure without citing specific panels, followed by a legend defined as description of each panel. Please identify each panel with uppercase letters in parenthesis (e.g. A, B, C, etc.)
The preferred file formats for any separately submitted figure(s) are TIFF or JPEG. All figures should be legible in print form and of optimal resolution. Optimal resolutions preferred are 300 dots per inch for RBG coloured, 600 dots per inch for greyscale and 1200 dots per inch for line art. Although there are no file size limitation imposed, authors are highly encouraged to compress their figures to an ideal size without unduly affecting legibility and resolution of figures. This will also speed up the process of uploading in the submission system if necessary.
The Editor-in-Chief and Publisher reserve the right to request from author(s) the high-resolution files and unprocessed data and metadata files should the need arise at any point after manuscript submission for reasons such as production, evaluation or other purposes. The file name should allow for ease in identifying the associated manuscript submitted.
Tables, lists and equations
Tables, lists and equations must be submitted together with the manuscript. Likewise, lists and equations should be properly aligned and its meaning clear to readers. Tables created using Microsoft Word table function are preferred. Place each table in your manuscript file right after the paragraph in which it is first cited. Do not submit your tables in separate files. The tables should include a concise but sufficiently explanatory title at the top. Vertical lines should not be used to separate columns. Leave some extra space between the columns instead. All tables should be based on three horizontal lines to separate the caption, header and body. A few additional horizontal lines MAY be included as needed (example below). Any explanations essential to the understanding of the table should be given in footnotes at the bottom of the table. SI units should be used.
This section is optional and contains all materials and figures that have been excluded from the entire manuscript. This information are relevant to the manuscript but remains non-essential to readersâ€™ understanding of the manuscriptâ€™s main content. All supplementary information should be submitted as a separate file in Step 4 during submission. Please ensure the names of such files contain â€˜suppl. infoâ€™.
Reference citations in the text should be numbered consecutively in superscript square brackets. Some examples:
1. Negotiation research spans many disciplinesÂ [3, 4].
2. This result was later contradicted by Becker and SeligmanÂ .
3. This effect has been widely studiedÂ [1â€“3, 7].
Personal communications and unpublished works can only be used in the main text of the submission and are not to be placed in the Reference section. Authors are advised to limit such usage to the minimum. They should also be easily identifiable by stating the authors and year of such unpublished works or personal communications and the word â€˜Unpublishedâ€™ in parenthesis.
E.g. (Smith J, 2000, Unpublished)
This section is compulsory and should be placed at the end of all manuscripts. Do not use footnotes or endnotes as a substitute for a reference list. The list of references should only include works that are cited in the text and that have been published or accepted for publication. Personal communications and unpublished works should be excluded from this section.
For references in reference list, all authors must be stated. Authors referenced are listed with their surname followed by their initials. All references should be numbered (e.g. 1. 2. 3. etc.) and sequenced according to the order it appears as an in-text citation. References should follow the following pattern: Author(s) followed by year of publication, title of publication, full journal name in italics, volume number, issue number in parenthesis, page range and lastly the DOI (if applicable). If the referred article has more than three authors, list only the first three authors and abbreviate the remaining authors to italicized â€˜et al.â€™ (meaning: "and others").
Journal article (print) with one to three authors
 Yao Yao, Xia Bin. Application of Phase Frequency Feature Group Delay Algorithm in Database Differential Access [J]. Computer Simulation, 2014, 31(12): 238-241.
Journal article (print) with more than three authors
 Gamelin FX, Baquet G, Berthoin S,Â et al. Effect of high intensity intermittent training on heart rate variability in prepubescent children [J].Â European Journal of Applied Physiology,Â 2009, 105: 731â€“738.
Journal article (online) with one to three authors
 Jackson D, Firtko A, Edenborough M. Personal resilience as a strategy for surviving and thriving in the face of workplace adversity: a literature review [J].Â Journal of Advanced Nursing, 2009, 60(1): 1â€“9,
Journal article (online) with more than three authors
 Hargreave M, Jensen A, Nielsen TSS,Â et al. Maternal use of fertility drugs and risk of cancer in childrenâ€”A nationwide population-based cohort study in Denmark [J].Â International Journal of Cancer, 2015, 136(8): 1931â€“1939.
Book with one to three authors
 Schneider Z, Whitehead D, Elliott D.Â Nursing and midwifery research: methods and appraisal for evidence-based practice. 3rd edn. 2009, Elsevier Australia, Marrickville, NSW.
Book with more than three authors
 Davis M, Charles L, Curry MJ,Â et al.Â Challenging spatial norms. 2013, Routledge, London.
Chapter or Article in Book
 Knowles MS. Independent study. InÂ Using learning contracts. 1986, Jossey-Bass, San Francisco, 89â€“96.
Proceedings of meetings and symposiums, conference papers
 Chang SS, Liaw L and Ruppenhofer J (eds).Â Proceedings of the twenty-fifth annual meeting of the Berkeley Linguistics Society, February 12â€“15, 1999: general session and parasession on loan word phenomena. 2000, Berkeley Linguistics Society, Berkeley.
Conference proceedings (from electronic database)
 Bukowski RM. Prognostic factors for survival in metastatic renal cell carcinoma: update 2008. Innovations and challenges in renal cancer: proceedings of the third Cambridge conference.Â Cancer, 2009,Â 115 (10): 2273, viewed 19 May 2009, Academic OneFile database.
Online Document with author names
 Este J, Warren C, Connor L,Â et al.Â Life in the clickstream: the future of journalism, Media Entertainment and Arts Alliance, 2008. viewed 27 May 2009, http://www.alliance.org.au/documents/ foj_report_final.pdf
Online Document without author name
Â Developing an argumentÂ n.d., viewed March 30 2009, http://web.princeton.edu/sites/writing/Writing_Center/WCWritingResources.htm
 Gale L.Â The relationship between leadership and employee empowerment for successful total quality managementÂ [D]. 2000, University of Western Sydney.
 Standards Australia Online.Â Glass in buildings: selection and installation. AS 1288â€“2006. 2006, SAI Global database.
 National Commission of Audit. Report to the Commonwealth Government, Australian Government Publishing Service, 1996, Canberra.
Government report (online)
 Department of Health and Ageing.Â Ageing and aged care in Australia, 2008, viewed 10 November 2008, http://www.health.gov.au/internet/main/publishing.nsf/Content/ageing
Â Guide to agricultural meteorological practices. 2nd edn, Secretariat of the World Meteorological Organization, 2010, Geneva.
Note: When referencing an entry from a dictionary or an encyclopedia with no author there is no requirement to include the source in the reference list. In these cases, only cite the title and year of the source in-text. For an authored dictionary/encyclopedia, treat the source as an authored book.