Intelligent Construction Technology of Hyperbolic Curtain Wall
PDF

Keywords

Hyperbolic curtain wall
Bending process
Building information model
Construction technology

DOI

10.26689/jwa.v6i4.4028

Abstract

Taking the hyperbolic glass curtain wall project of the Wuhan Jinyinhu Commercial Plaza as an example, the characteristics of different curved glass forming technologies were analyzed in this paper. Combined with the actual engineering situation, the curved steel process is selected to produce the hyperbolic glass curtain wall, and the application of BIM technology in the quality control of hyperbolic glass curtain wall in the production process was analyzed, and the effects of heating condition, bending time, cooling condition, and bending tempering error in the manufacturing accuracy of the curved glass curtain wall were studied, in hope that this project can provide practical reference for similar curtain wall design construction in the future.

References

Liu W, 2017, Analysis on Key Points of Subgrade and Pavement Design in Settlement Section of Road and Bridge. Construction Technology Development, 44(21): 86–87.

Liu M, Wang Z, Li S, 2019, The Application of BIM in Detailed Design of Complex Special-shaped Buildings. Construction Economy, 40(2): 56–59.

Guo X, 2014, Research on the Key Technology of Fuzhou Olympic Stadium Simulation of Construction Process Using BIM. Construction Technology, 574–576.

Wei C, Qu X, Shu et al., 2018, The Application of BIM Technology in Beijing University Gymnasium Building Construction. Construction Technology, 47(2): 123–126.

Peng K, Zhong Y, Wang N, 2020, Construction Technology and Management of Large Indoor Stadium Roof Steel Grid. Construction Economy, 41(S2):170–173.

Li D, Miao C, Guo C, et al., 2015, Analysis of Spatial Surface Curtain Wall Slight Warpage Forming for Kunming West Wanda Plaza. Building Science, 31(3): 93–97.

Su H, Nie JX, Yu P, et al., 2015, Construction of Curtain Wall with Hyperboloid Triangular Concave and Convex Surface Aluminum Panel. Construction Technology, 44(6): 92–94 + 103.

Feng L, Liu J, Zhu L, et al., 2011, Construction Simulation Analysis on Single-Layer Cable-Net Curve Curtain Wall of China Maritime Museum. Building Structure, 41(3): 11–13.

Wang CF, He Y, Shi QL, 2019, Application of 3D Scanning Technology in Curved Curtain Wall. Value Engineering, 38(24): 219–221.

Tong K, 2020, Application of Parametric Technology of Building BIM in Design and Construction of Irregular Curved Curtain Wall. Guangdong Architecture Civil Engineering, 27(2): 70–73.

Liu X, Hou C, Dai C, et al., 2019, Key Techniques for Arc Curved Curtain Wall Construction of Chongqing Raffles City. Construction Technology, 48(18): 1–3.