Research Status and Development Trends of Lattice-Foam Composite Lightweight Porous Metallic Materials

Kerong Zhang; Jirui Yue; Yankuo Yin; Keqing Zhang

doi:10.26689/jera.v9i6.13177

Kerong Zhang Xizang Minzu University, Xianyang 712082, Shaanxi, China
Jirui Yue Xizang Minzu University, Xianyang 712082, Shaanxi, China
Yankuo Yin Xizang Minzu University, Xianyang 712082, Shaanxi, China
Keqing Zhang Inner Mongolia Medical University, Hohhot 010110, Inner Mongolia, China

DOI: https://doi.org/10.26689/jera.v9i6.13177

Keywords: Lattice-foam composite structure, Ultra-light porous material, Preparation technology, Joining technology

Abstract

This paper reviews the research status and development trends of lattice-foam composite structural materials. It introduces the characteristics and applications of lattice metallic materials and metallic foam materials among ultra-light porous materials, and points out their respective shortcomings. Subsequently, it elaborates on the research progress of lattice-foam composite structural materials at home and abroad, including the research achievements of research teams such as Xi’an Jiaotong University and the University of Virginia in the United States. Then, the key technologies in the preparation process of lattice-foam composite structural materials are discussed in detail, such as the rapid prototyping technology for special-shaped parts of porous materials, the friction stir welding technology for metallic foams, and the large-area joining and composite technology between the core and face sheets of composite structures. Finally, the research on lattice-foam composite structural materials is summarized and prospected.

References

Evans A, 2001, Lightweight Materials and Structures. Materials Research Bulletin, 26(10): 790–797.

Wadley H, Dharmasena K, Masta M, et al., 2013, Impact Response of Aluminium Corrugated Core Sandwich Panels. International Journal of Impact Engineering, 2013(62): 124–128.

Han B, Yu B, Lu T, et al., 2015, Foam Filling Radically Enhances Transverse Shear Response of Corrugated Sandwich Plates. Materials & Design, 2015(77): 132–141.

Tian P, Zhao G, Lu T, 2009, Numerical Analysis of Dynamic Response of Metal Grid Sandwich Plates with Filling Materials under High-Speed Impact. Chinese Journal of Applied Mechanics, 26(4): 788–792.

Zhang J, Qin Q, Wang T, 2013, Compressive Strengths and Dynamic Response of Corrugated Metal Sandwich Plates with Unfilled and Foam-Filled Sinusoidal Plate Cores. Acta Mechanica, 224(4): 759–775.

Qin Q, Zhang J, Wang Z, 2014, Indentation of Sandwich Beams with Metal Foam Core. Transactions of Nonferrous Metals Society of China, 24(8): 2440–2446.

Torre L, Kenny J, 2000, Impact Testing and Simulation of Composite Sandwich Structures for Civil Transportation. Composite Structures, 50(3): 257–267.

Vaziri A, Xue Z, Hutchinson J, et al., 2006, Metal Sandwich Plates with Polymer Foam-Filled Cores. Journal of Mechanics of Materials and Structures, 1(1): 97–127.

Yazici M, Wright J, Shukla A, et al., 2014, Experimental and Numerical Study of Foam Filled Corrugated Core Steel Sandwich Structures Subjected to Blast Loading. Composite Structures, 2014(110): 98–109.

Yungwirth C, Radford D, Aronson M, et al., 2008, Experiment Assessment of the Ballistic Response of Composite Pyramidal Lattice Truss Structures. Composites Part B: Engineering, 39(3): 556–569.

Wadley H, Dharmasena K, Masta M, et al., 2013, Impact Response of Aluminum Corrugated Core Sandwich Panels. International Journal of Impact Engineering, 2013(62): 114–128.

Zhang Q, Lu T, Yan L, et al., 2011, Preparation Method of a Lattice Metal-Aluminum Foam Composite Material. Chinese Patent, CN 201110233384.8.

Wang W, Zhang Q, Yang X, et al., 2014, An Aluminum Foam-Corrugated Plate Composite Sandwich Panel and its Preparation Method. Chinese Patent, CN 201410409859.8.

Sallica-Leva E, Jardini A, Fogagnolo J, et al., 2013, Microstructure and Mechanical Behavior of Porous Ti–6Al–4V Parts Obtained by Selective Laser Melting. Journal of the Mechanical Behavior of Biomedical Materials, 2013(26): 98–108.

Traini T, Mangano C, Sammons R, et al., 2008, Direct Laser Metal Sintering as a New Approach to Fabrication of an Isoelastic Functionally Graded Material for Manufacture of Porous Titanium Dental Implants. Dental Materials, 24(11): 1526–1533.

Yadroitsev I, Shishkovsky I, Bertrand P, et al., 2009, Manufacturing of Fine-Structure 3D Porous Filter Elements by Selective Laser Melting. Applied Surface Science, 255(10): 5523–5527.

Xie F, He X, Cao S, 2013, Structural and Mechanical Characteristics of Porous 316L Stainless Steel Fabricated by Indirect Selective Laser Sintering. Journal of Materials Processing Technology, 213(6): 838–843.

Ryan G, Pandit A, Apatsidis D, et al., 2008, Porous Titanium Scaffolds Fabricated using a Rapid Prototyping and Powder Metallurgy Technique. Biomaterials, 29(27): 3625–3635.

Vandrovcova M, Douglas T, Mróz W, et al., 2015, Pulsed Laser Deposition of Magnesium-Doped Calcium Phosphate Coatings on Porous Polycaprolactone Scaffolds Produced by Rapid Prototyping. Materials Letters, 2015(148): 178–183.

Pogibenko A, Konkevich V, Ryazantsev L, 2001, The Weldability of Alminum-Based Foam Materials. Welding International, 15(4): 312–316.

Nowacki J, Moraniec K, 2015, Welding of Metallic AlSi Foams and AlSi-SiC Composite Foams. Archives of Civil and Mechanical Engineering, 15(4): 940–950.

Zu G, Yao G, Li X, et al., 2010, Transient Liquid Phase Diffusion Welding Method for Aluminum Foam Materials. Chinese Patent, CN 201010298238.X.