Keywords
Steel structures
Technology and management
Complex joints
Submitted : 2022-06-29
Accepted : 2022-07-14
Published : 2022-07-29
Abstract
With the rapid development of modern large-span and large-complex steel structure buildings, at present the Building Information Modeling (BIM) technology plays an important role from the design to the construction of a building. This study takes the Comprehensive Gymnasium of Hubei Olympic Sports Center as the carrier and introduce the BIM technology from two aspects; The technology; and the management. Further, the optimal application of BIM technology in the complex component nodes, the technical guidance of component processing, and the correction and verification of drawings were emphatically analyzed in this paper. An engineering practice shows that the application of BIM technology has greatly improved the production efficiency, shortened the construction period, reduced unnecessary cost, and lastly laid a solid foundation for the smooth completion of the project.
References
Zhang Y, Gao Z, Liu Z, et al., 2021, As Swift as a Swan as Graceful as a Dragon on the Design of National Sliding Center. Architectural Journal, 2021(Z1): 104-109 (in Chinese).
Zhao L, You D, Zhang Y, et al., 2017, Design Innovation and Key Construction Technique of Beijing Yanqi Lake International Convention and Exhibition Center Project. Architecture Technology, 48(6): 566-571 (in Chinese).
Nie Q, Xu B, Huang R, 2021, Deepening Design of Outrigger and Waist Truss Layer of 288m Super High-Rise Office Building. Building Structure, 51(S1): 157-159 (in Chinese).
Ding WS, Zhang BB, 2017, Hazard Management of Large-scale Steel Structure Construction Based on BIM Technology. Journal of Civil Engineering and Management, 34(3): 13-19 (in Chinese).
Lin W, Zhang Y, Zhao H, et al., 2021, Risk Management of Program Schedule Based on BIM-CCM. Yangtze River, 52(S2): 335-340 (in Chinese).
Tong Z, Wang G, LI GJ, et al., 2021, Application of BIM and GIS Integration Technology for Channel Regulation Project. Port & Waterway Engineering, 2021(4): 163-168+179 (in Chinese).
Qin YW, Shi WJ, Xiao MZ, 2019, Engineering Quality Control of Bridge Steel Components Based on BIM+3D Laser Scanning Technology. Journal of Civil Engineering and Management, 36(4): 119-125 (in Chinese).
Su K, Zhang Y, Zhang E, et al., 2017, Construction Technology of Large Span Heavy Steel Truss of a Commercial Center High Roof. Construction Technology, 46(8): 83-87 (in Chinese).
Li HF, Cui J, Gan M, et al., 2013, BIM Technology in Structural Design of the Retractable Roof of Shaoxing Stadium. Building Structure, 43(17): 144-148 (in Chinese).
Wu J, 2021, The Essence of BIM and Cognition of Engineering Practice. Journal of Railway Engineering Society, 38(3): 72-79 (in Chinese).
Lu T, 2015, Low-position Assembly of Ellipsoid Shell of Wuhan International Expo Center. Construction Technology, 2015(17): 18-21+32 (in Chinese).
Lu T, Hu Z, Ma C, et al., 2015, Detail Design and Analysis of Ellipsoid Steel Corridor of Wuhan International Expo Center. Construction Technology, 2015(17): 1-4+17 (in Chinese).
Zheng HH, Liu Y, Li Y, 2015, A Review on Research and Application of the BIM Technology. Structural Engineers, 31(4): 233-241 (in Chinese).