Keywords
Calculation of working time quota
Fixture design
Submitted : 2024-05-21
Accepted : 2024-06-05
Published : 2024-06-20
Abstract
This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines. It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme, a selection of suitable machine tools, and the setting of processing parameters. Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements. Additional aspects of the project included the design of part drawings, calculation of working time quota, design of auxiliary guides, support clamping, and hydraulic circuits, all aimed at fulfilling practical production requirements.
References
Lu BC, 2009, Technical Foundation of Mechanical Manufacturing, China Machine Press, Beijing.
Zhu YX, Pu LX, 2009, Modern Fixture Design Handbook, China Machine Press, Beijing.
Ye ZX, Chen JB, 2014, Courseware of Mechanical Manufacturing Engineering.
Zuo JM, 2007, Hydraulic and Pneumatic Transmission, China Machine Press, Beijing.
Li YM, 2013, Mechanical Manufacturing Technology Handbook, China Machine Press, Beijing.
Ai X, Xiao SG, 2002, Cutting Parameters Handbook, China Machine Press, Beijing.
Gan YL, 2010, Geometric Tolerance and Detection, Shanghai Scientific & Technical Publishers, Shanghai.
Zhao XS, Ren XZ, Yu H, 2009, Design of Manufacturing Equipment, Huazhong University of Science & Technology Press, Wuhan.
Pu LG, Ji MG, (eds) 2006, Mechanical Design (8th Edition), Higher Education Press, Beijing.
Xu ZL, 2007, Design of Manufacturing Equipment, Huazhong University of Science & Technology Press, Wuhan.
Ni SS, 2001, Machinery Manufacturing Technology and Equipment, Chemical Industry Press, Beijing.
Gu CY, 1981, Mechanical Manufacturing Technology, Shaanxi Science and Technology Press, Shaanxi.
Tang JS, (ed) 2000, Concise Handbook of Mechanical Design Manual, Shanghai Scientific & Technical Publishers, Shanghai.
Meng SN, (ed) 1992, Machining Technology Handbook, China Machine Press, Beijing.