Keywords
Explosive dispersion
Numerical simulation
Published : 2026-08-14
Abstract
Liquid explosive dispersal refers to the process in which the instantaneous high pressure generated by explosive detonation drives the liquid within the device. This paper reviews domestic and international research on liquid explosive dispersal, categorizing it into core directions including dispersal mechanism, influencing factors, and numerical simulation, and systematically summarizes the research progress of key parameters during the liquid explosive dispersal process.
References
Ding J, Liu J, Peng J, 1999, One-dimensional Numerical Simulation of the Initial Stage of Liquid Fuel Explosive Dispersion. Journal of Ballistics, 1999(03): 29–33.
Zuo X, 2020, Experimental Study on Combustion, Explosion and Atomization Characteristics of Liquid Fuel, thesis, Nanjing University of Science and Technology.
Hou S, Zhao Q, Bai H, et al., 2023, Numerical Simulation and Experimental Study on Typical Liquid Explosive Dispersion. Chemical Defense Research, 2(1): 56–64.
Xue T, Xu G, Huang Q, et al., 2015, Research Progress on the Explosive Dispersion Process. Science Technology and Engineering, 15(21): 60–67.
Gardner D, 1990, Near-field Dispersal Modeling for Liquid Fuel-Air Explosives. In: Proceedings of the 13th International Symposium on Military Applications of Blast Simulation.
Glass M, 1990, Far-field Dispersal Modeling for Fuel-Air-Explosive Devices. Sandia National Laboratories Report SAND90-8239.
Poppoff I, Thuman W, 1967, Research Studies on the Dissemination of Solid and Liquid Agents. Final Report.
Samirant M, Smeets G, Baras C, et al., 1989, Dynamic Measurements in Combustible and Detonable Aerosols. Propellants, Explosives, Pyrotechnics, 14: 47–56.
Zabelka R, Smith L, 1969, Explosively Dispersed Liquids. Part 1. Dispersion Model. Report.
Yue Z, 2006, Study on Water Atomization by Explosive Dispersion, thesis, Anhui University of Science and Technology.
Ding J, 2001, Theoretical Model and Full Process Numerical Simulation of Liquid Explosive Dispersion, thesis, Dalian University of Technology.
Yang L, Yang X, Huang Z, 2016, Experimental Study on Shock Wave Driven Axisymmetric Dispersion of Liquid. Journal of Experiments in Fluid Mechanics, 30(6): 32–36.
Hinze J, 1955, Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes. AIChE Journal, 1(3): 289–295.
Yang W, Jia M, Sun K, et al., 2017, Study on the Transition of Droplet Deformation-Bag-Multimode Breakup. Journal of Engineering Thermophysics, 38(2): 416–420.
Wang C, Wu Y, Shi H, et al., 2016, Breakup Process of Droplet Under Shock Wave Impact. Explosion and Shock Waves, 36(1): 129–134.
Shi Y, Hong T, Yao W, et al., 2014, Simulation of Explosion-Driven Liquid Stratification and Droplet Size. Chinese Journal of Computational Mechanics, 31(6): 781–786.
Chen X, Wang Z, Yang E, et al., 2021, Predictive Model for Concentration Distribution of Explosive Dispersal. ACS Omega, 6(3): 2085–2099.
Wu D, Yang X, 2003, Experimental Study on Liquid Dispersion Under Strong Shock Wave. Explosion and Shock Waves, 2003(1): 91–95.
Yan S, Liu F, Yue Z, et al., 2007, Effect of Specific Charge on the Motion Characteristics of Water Explosive Dispersion and Atomization. Journal of Harbin Institute of Technology, 2007(11): 1825–1828.
Lu X, Li L, Zhao S, et al., 2016, Effect of Casing Constraint on Flow Field Characteristics of Liquid Explosive Dispersion. Explosion and Shock Waves, 36(6): 803–810.
Cai Q, Han Z, Wan Q, et al., 1999, Measurement of Cloud Particle Size Formed by Secondary Fragmentation of Liquid Ring and Calibration of Testing System. Explosion and Shock Waves, 1999(2): 56–62.