Design of Elevator Control System Based on S7- 200PLC

Xin Chen; Xuemin Bai; Li Yang; Qi Wang

doi:10.26689/jera.v9i6.13164

Xin Chen Department of Physics and Electronic Engineering, Jinzhong University, Jinzhong 030619, Shanxi, China
Xuemin Bai Department of Physics and Electronic Engineering, Jinzhong University, Jinzhong 030619, Shanxi, China
Li Yang Department of Physics and Electronic Engineering, Jinzhong University, Jinzhong 030619, Shanxi, China
Qi Wang Department of Physics and Electronic Engineering, Jinzhong University, Jinzhong 030619, Shanxi, China

DOI: https://doi.org/10.26689/jera.v9i6.13164

Keywords: PLC, Elevator, Control system

Abstract

With the acceleration of urbanization and the increasing number of high-rise buildings, elevators, as key equipment for vertical transportation, have attracted significant attention regarding the safety, reliability, and efficiency of their operation. This design develops a four-floor elevator control system based on S7-200PLC. It realizes the following functions: the second and third floors support both upward and downward request functions (with corresponding indicator lights turning on), the first floor only supports the upward request function, and the fourth floor only supports the downward request function. Meanwhile, the elevator automatically opens its door after arriving at each floor and closes the door automatically 6 seconds later. The design aims to achieve precise control and efficient operation of the elevator.

References

Si Y, 2013, Application of Siemens S7-200. Information & Communications, 9(1): 268.

Yang Z, Ni Z, Yang L, 2018, Design of 30-Floor Elevator Control System Based on S7-200. Computer Knowledge and Technology, 19(14): 282–283.

Zhang Y, Hu K, Li Y, 2021, Design of Elevator Control System Based on Siemens S7-200PLC. Electronic Test, 2021(23): 13–15.

Chen J, 2012, Elevator Structure Principle, Installation and Maintenance, China Machine Press, Beijing.

Liu J, Zhu D, Liang Z, 2006, Electrical Design of Elevators, China Electric Power Press, Beijing.

Sun J, 2018, Speed Control System and Safety Design of Residential Elevators, thesis, Yangzhou University.

Wei W, Gao P, 2013, Design of Collective-Selection Elevator Control System Based on S7-200PLC. China Science and Technology Review, 2013(3): 146.

Xu Y, 2010, Research on Variable-Frequency Speed Regulation Elevator Control System Based on S7-200PLC, thesis, Zhejiang University of Technology.

Zhang Y, Wang R, 2023, Simulation Design of 4-floor Elevator Control System Based on PLC. Technology and Innovation, 2023(12): 85–87.

Zhang H, Ma Y, Lei L, et al., 2010, Research and Application of S7-200PLC in Variable-Frequency Speed Regulation Elevator Control System. Railway Computer Application, 19(8): 7–10.

Bai X, Chen G, Huo K, 2014, Design of Virtual Elevator Control System Based on PC-PLC. Computer Simulation, 31(6): 4.

Zhao Y, Yu B, Feng F, 2004, Elevator Model Control System of S7-200. Machinery Manufacturing and Automation, 2004(6): 93–95.

Chen H, 2006, Application of Siemens PLC in the Control of Freight Elevators in Shopping Malls. Market Modernization, 2006(13): 54.

Li S, Xu S, Zhang W, et al., 2010, Automatic Flag-Raising Control System Based on WinCC and S7-200 PLC. Journal of Qingdao University (Engineering and Technology Edition), 25(2): 10–15.

Liu J, 2008, Application of S7-200 PLC in Elevator Model. Shanxi Electronic Technology, 2008(5): 47–48