Research on the Application of Single-Chip Microcomputer in Wind Turbine Control
Download PDF
$currentUrl="http://$_SERVER[HTTP_HOST]$_SERVER[REQUEST_URI]"

Keywords

Microcontroller
Wind power generation
Generator control

DOI

10.26689/jera.v9i4.11434

Submitted : 2025-07-08
Accepted : 2025-07-23
Published : 2025-08-07

Abstract

As an important source of clean and renewable resources, the importance of wind power generation is increasing under the background of the theme of “environmental protection” in the new era. The efficiency of wind power generation is mainly affected by the reliability and performance of the power generation system, so it is necessary to use a single-chip microcomputer system and an intelligent algorithm to assist control, so as to improve the performance of wind power generation. Based on this research background, this paper expounds the working principle and basic characteristics of a single-chip microcomputer, summarizes its application advantages in wind turbine control, and puts forward the application practice strategy of a single-chip microcomputer in a wind turbine control system, which provides important assistance for the upgrading of the wind power system.

References

Zhang Z, 2021, Research on the Application of Single Chip Microcomputer in Wind Turbine Control. Electronic Components and Information Technology, 8(04): 178–180.

Li C, Wei L, Jia H, et al., 2024, Design of Wind Power Micro-Simulation Device. Electrical Technology for Intelligent Building, 18(01): 52–54 + 58.

Zhou XX, 2023, Application Analysis of Single Chip Microcomputer in the Field of Electronic Technology. Paper Equipment & Materials, 52(02): 30–32.

Zhao H, Zhang Z, Ma Z, et al., 2022, Design Scheme of Small Household Wind Power Control Experimental Device Based on Single Chip Microcomputer. Science, Technology Innovation and Productivity, (07): 59–61.

Zhang F, 2022, Research on Dynamic Alignment Based on Wind Power Coupling, dissertation, Inner Mongolia University of Science and Technology.

Zhang M, Wang Z, Mu X, et al., 2023, Research on Stepper Motor Control System Based on Single Chip Microcomputer. Mechatronics Product Development and Innovation, 36(03): 133–135 + 145.

Weng L, 2022, Design of Intelligent Curtain Control System Based on STM32. Mechatronic Engineering Technology, 51(04): 228–231.

Wang C, 2012, Research on Brushless DC Motor Control System Based on STM32. Microprocessor, 43(02): 11–15.

Qi Q, 2021, Research on Application of Embedded Single Chip Microcomputer in Motor Control System. China Equipment Engineering, (23): 19–20.

Yang Y, 2021, Design of Motor Speed Control System Based on Single Chip Microcomputer. Electronic Manufacturing, (22): 3–5 + 13.

Huang L, 2020, Application of Single Chip Microcomputer Technology in Electric Drive Control System. Paper Equipment & Materials, 54(03): 103–105.

Liu Z, Cheng Y, Zhang X, 2024, Research on MCU Control System Design of Stepper Motor. Science and Technology Information, 22(16): 74–76.

Xiao L, 2024, Design of Stepper Motor Drive Controlled by AT89C52 Single Chip Microcomputer. Fujian Computer, 40(07): 96–99.

Lv Y, Wang J, Zhang Q, 2024, Fusion Analysis of Motor Control and LCD Display. Electronic Technology, 53(05): 154–155.

Ma Q, 2024, Case Design of Speed and Displacement Control for Two-Phase Hybrid Stepper Motor. Mechanical Engineering and Automation, (01): 8–10.