Abstract
Abstract - In this paper an analysis of the physical principles of two-criterion optimization Pareto static mode of operation of power sensors cantilever type of rectangular type with a stable cross-section. The proposed criterion based on the Cauchy number is one of the characteristic numbers of the proportional miniaturization of microsystem technology. It is established that for a rectangular cantilever with a stable cross-section, the value of the Cauchy does not depend on the width of the micro-console and the material from which it is made.
References
Zhu O., (2011), Microcantilever Sensors in Biological and Chemical Detections, Sensors & Transducers Journal, 125, Issue 2,1-21
Tamayo J., Kosaka P., Ruz J., et.al. (2013), Biosensors based on nanomechanical systems. Chem. Soc. Rev., vol.42, PP. 1287-1311
Voigtlander B. (2015), Scanning Probe Microscopy, Atomic Force Microscopy and Scanning Tunneling Microscopy, Springer
Mastinu G., Gobbi M., Miano C. (2003) Optimal Design of Complex Mechanical Systems. Springer-Verlag Berlin Heilderberg 2006 P.359; Raphael B., Smith I. Fundamentals of computer aided engineering. John Wiley
Slawomir Koziel and Xin-She Yang (Eds.) (2011) Computational Optimization, Methods and Algorithms. Springer-Verlag Berlin Heidelberg
Plaut R., Virgin L. (2011) Optimal design of cantilevered elastica for minimum tip deflection under self-weight. Journal Structural and Multidisciplinary Optimization. Volume 43 Issue 5, May 2011. Vol.43. Issue 5. PP. 657-664
Gurugubel S., Kallepalli D. (2014) Weight and deflection optimization of Cantilever Beam using a modified Non-Dominated sorting Genetic Algorithm. Іternational organization of Scientific Research. Journal of Engineering (IOSRJEN). vol.04, Issue 03, PP.19- 23
Gobbi M., Levi F., Mastinu G., Previati. (2015) On the analitical derivation of the Pareto-optimal set with applications to structural design. Struct Multidisc Optim. Structural and Multidisciplinary Optimization. Vol. 51, Issue 3, pp 645–657
V.Muthukumaran, R.Rajmurugan, V.K.Ram Kumar (2014) Cantilever Beam and Torsion Rod Design Optimization Using Genetic Algorithm. International Journal of Innovative Research in Science, Engineering and Technology. Volume 3, Special Issue 3. PP.2682-2690
Ortiz G. Universidad Nacional de Colombia, Manizales, Colombia:
Cantilever Beams Part 1. (2010) Beam Stiffness. Technical TIDBITS. Issue No.20-August 2010 Update from Original February 2001 Publication. Brush Wellman Inc.
Sonin A. (2001) The Physical Basis of Dimensional Analysis. Department of Mechanical Engineering MIT Cambridge, MA 02139. http://web.mit.edu/2.25/www/pdf/DA_unified.pdf
Gad-el-Hak, M. (2002) MEMS Handbook. CRC Press, Boca Raton, FL, USA
Deb K. (2001) "Multi-Objective optimization using evolutionary algorithms". John Wiley & Sons, -497 p.
Messac A. (2015) Optimization in Practice with MATLAB for Engineering Students and Professionals. New York, USA, Cambridge University Press is part of the University of Cambridge. Additional resources for this publication at www.cambridge.org/Messac
Kortelysi G., Selley C., Gyurecz G. Et.al. (2012) Engineering Optimization. Typotex. Budapest University of Technology and Economics. Obuda University and Szent Istvan University. P.225. www.tankonyvtar.hu