Realization of Distribution Network Feeder Terminal Unit based on Dual-DSP
Download PDF

Keywords

Dual-DSP
Distribution Network
Monitoring unit
Signal Scheduling

DOI

10.26689/jera.v5i2.2221

Submitted : 2021-05-19
Accepted : 2021-06-03
Published : 2021-06-18

Abstract

This paper presents the design proposal of distribution network monitoring unit based on dual-DSP. A detailed description of the hardware structure about the device is introduced which including signal scheduling, SPI communication, the serial human-computer communication and network communication. Additionally, the paper describes the software process about the master and slave DSPs. Then the analog precision test and the protection response test are carried out. The result shows that the design proposal is correct.

References

Zhou H., Luo X., Deng Q (2011). Design of DSP-based FTU for RMU of Intelligent Distribution Grid[J]. Electric Power Automation Equipment, 31(2):124-128.

Zhou H., Luo X., Deng Q (2010). The Design and Development of DSP Based Ring Main Unit FTU in Intelligent Distribution. 2010 The International Conference on Electrical and Control Engineering

Cai S (2005). Research and development of intelligent ring main unit of control measuring and protection [J], Electric Power Automation Equipment, 25(2):24-25

Zhou N., Jia Y., Zhao Yuan (2006). Feeder terminal unit based on system protection to distribution network[J], Automation of Electric Power System, 30(8):94-97

Sood K., Fischer D., Eklund JM., et al. (2009). Developing a Communication Infrastructure for the Smart Grid[C], IEEE Electrical Power & Energy Conference, 1-7

Purucker SL., Thomas RJ., Monteen LD. (2007), Feeder Automation Designs for Installing an Intergrated Distribution Control System[J], Power Apparatus and System, IEEE Transactions, 104(10):2929-2934

Teng JH., Lu CN. (2006), Value-based distribution feeder automation planning[J]. International Journal of Electrical Power and Energy Systems, 28(3):186-194.

Wada K., Fujita H., Akagi H. (2006), Considerations of a Shunt Active Filter Based on Voltage Detection for Installation on a Long Distribution Feeder[J]. IEEE Transactions on Industry Applications, 38(4):1123-1130.